PopupMenu: enhance PopupSwitchMenuItem to show status labels
Moves and converts NMDeviceTitleMenuItem from network.js into
PopupSwitchMenuItem, so that it can show both a switch and a
greyed-out status label. This will be soon used by the Bluetooth menu.
NetworkMenu: place network items in the right position
_createNetworkItem was always appending access point at the end of
the menu when their position was < 5 (NUM_VISIBLE_NETWORKS), ignoring
the presence or absence of _overflowItem, which thus ended in the
middle of the network list. Fix that.
Florian Müllner [Tue, 21 Jun 2011 22:28:42 +0000 (00:28 +0200)]
workspaces-view: Handle clip rectangle separately
After completing the overview transition, the workspace view is
clipped to avoid overlapping the search entry/view selector titles
while switching workspaces. For clipping, the view's position and
size was used, which works well assuming that the workspace pager
will start hidden or stay zoomed out while the overview is visible.
However, that assumption holds no longer true, as auto-hiding the
pager now depends on the number of workspaces, and thus may change
while in the overview. For instance, when starting with the pager
being visible, the clip area ends up being too small when moving
all windows to the first workspace (and thus triggering auto-hide).
As a fix, handle the clip rectangle separately from the view's
geometry, and set it always to the area the workspaces would
occupy with the pager hidden.
Dan Winship [Fri, 10 Jun 2011 13:51:55 +0000 (09:51 -0400)]
main: move pointer-sync-on-restack code here
We call global.sync_pointer() on MetaScreen::restack as a hack to try
to fix up the hover state after a pointer grab. Previously we were
doing this in chrome.js, since there was already a ::restack handler
there anyway, but this isn't really related to the chrome at all, so
move it to main.js instead.
Colin Walters [Thu, 23 Jun 2011 00:10:56 +0000 (20:10 -0400)]
Fix various srcdir!=builddir issues
jhbuild will default to srcdir != builddir in the future for various
reasons.
The enum generation rules were just broken and both did
cd $(srcdir) and $(addprefix $(srcdir)).
Also, remove an unnecessary $(addprefix) from the GIR sources; thanks
to Dan Winship for pointing out that make will look in both srcdir and
builddir, so it's not necessary to add a prefix explicitly. Doing so
breaks obviously when adding the sourcedir to a builddir file.
Florian Müllner [Tue, 31 May 2011 16:49:36 +0000 (18:49 +0200)]
workspaceThumbnail: Handle minimized windows
Workspace thumbnails are supposed to be miniatures of the "real"
workspace they represent, but currently they show minimized windows
like the window picker.
Instead, hide minimized windows and track changes to update the
thumbnail accordingly.
Florian Müllner [Tue, 21 Jun 2011 20:02:32 +0000 (22:02 +0200)]
workspaces-view: Always update zoom on workspace changes
With commit 59a3e393f9 whether the workspace pager should autohide
now depends on the number of workspaces. As we only track changes
to the number of workspaces while the overview is visible, we miss
changes in "normal mode", i.e. when creating a new workspace by
moving a window with ctrl-alt-shift-arrow; as a result, the pager's
autohiding might be incorrect when entering the overview after that.
As a fix, keep tracking changes to the workspaces when the overview
is hidden and update the zoom options.
Florian Müllner [Fri, 20 May 2011 11:57:38 +0000 (13:57 +0200)]
search-display: Try harder to use a correct drag actor source
Commit 429f809b7 fixed an exception in getDragActorSource(), but
the returned actor is only an approximation (e.g. in contrast to
the actual drag actor, it includes the label).
Try a bit harder to return the correct actor and only fall back to
the approximation when necessary.
Florian Müllner [Thu, 16 Jun 2011 12:10:15 +0000 (14:10 +0200)]
workspaces-display: Improve pager autohide
The purpose of autohiding the workspace pager on the right was to
avoid exposure of workspaces to users who are not using them.
However, for users who do use workspaces, the behavior limits the
purpose of the overview. To fix, always show the pager if more than
one workspace is actively used.
StTheme: retrive the list of custom stylesheets and use it in loadTheme()
Using the list of stylesheets loaded with st_theme_load_stylesheet(),
one can build an StTheme that is completely identical to the previous
one, except for one property (application-stylesheet).
This allows rt and the user-theme extension to work while respecting
the theming of other extensions.
Florian Müllner [Fri, 10 Jun 2011 20:58:54 +0000 (22:58 +0200)]
statusMenu: Don't force a screen lock when suspending
The screen panel in System Settings has a preference whether the
screen should be locked on suspend. This works fine when suspending
by closing the lid, but the "Suspend" menu item in the user status
menu ignores the setting and always locks the screen.
Fix by activating the screen saver before suspending rather than
locking explicitly.
Implement a Telepathy Approver and Handler (#643594)
As the Shell does more than observing channels (users can interact with them),
it has to be an Handler as well. We have to make sure that all the new
incoming text channels are handled by the Shell by default, so we make it an
Approver as well.
From an user point of view, the only difference is that Empathy's tray icon
will stop blicking when receiving new channels.
We rely on ChannelDispatcher.DelegateChannels() and PresentChannel() to
interact with Empathy. Those methods have been implemented in
telepathy-mission-control 5.9.0 and telepathy-glib 0.15.0.
If we have more than 5 (which can happen with VPN connections), place
them into a More... submenu, which also becomes scrollable if needed.
To protect from race conditions and ordering issues while reading
connections, sort them in alphabetic order when the timestamp is equal.
Colin Walters [Fri, 20 May 2011 19:50:54 +0000 (15:50 -0400)]
Add "Memory" tab to lg
shell_global_get_memory_info() is a new function which extracts a few
global counters we have already, namely glibc's mallinfo, spidermonkey's
JSGC_BYTES, and gjs' counters for boxed/object/etc wrappers.
There is some slight overlap with perf; ultimately though I'd
like this function to do some more extensive analysis, so it wouldn't
be quite the same.
perf is going to be mainly concerned with how big the whole process
over time is; memory_info is for debugging memory leaks.
st-scroll-view: Make the fade effect and offset themable
Theme authors now have the power (and responsibility) of creating fade
effects with the new CSS length property '-st-fade-offset'. A value of
0 disables the effect.
This new CSS approach replaces the current programmatic toggle of
the 'vfade' property. A new CSS style class name 'vfade' is used as
a replacement for the old property.
Florian Müllner [Wed, 1 Jun 2011 12:47:51 +0000 (14:47 +0200)]
workspaces-view: Set geometry on new workspaces
Currently the workspace geometry is updated on zoom/allocation
changes, which means that newly added workspaces use their initial
geometry of (0, 0, 0, 0) until the next zoom change. As a result,
windows on the affected workspaces are mispositioned, e.g. placed
outside the workspace area. To fix, set the geometry on newly added
workspaces to the view's cached values.
Florian Müllner [Wed, 1 Jun 2011 02:23:12 +0000 (04:23 +0200)]
workspaces-view: Simplify handling of removed workspaces
Workspaces used to contain the desktop background, so when a
workspace was removed, we animated its actor to an off-screen
position before destroying it. As the background has been
removed a while ago, we can destroy the actor directly.
If the former is empty (default), only the extensions not contained in
the latter are loaded. Else, all extensions in the former that are
not contained in the latter are loaded.
Owen W. Taylor [Tue, 3 May 2011 17:22:06 +0000 (13:22 -0400)]
dash: during drag, only offer trash can when dragging favorites
We should only show the trash can when the user starts dragging a
favorite from the dash, not when the user starts dragging an application
that happens to be a favorite via a window or an application icon
in the applications view.
Some users are confused when their devices are not shown in the
network menu, even if they configured them manually. Mark their presence
by showing them in the menu, even if they cannot be otherwise
interacted with.
Also add a status string for deactivating devices (none currently,
soon will appear in NetworkManager).
Dan Winship [Tue, 5 Apr 2011 14:55:27 +0000 (10:55 -0400)]
StImText: remove two references to old clutter bugs
Remove a workaround for clutter_actor_get_transformed_position() not
working inside paint(), and remove a comment about
ClutterText::position not being properly notified, since it is now.
(However, it doesn't seem worth it to rewrite the code to use
notification, since that would actually end up being more complicated
than the current solution.)
Dan Winship [Tue, 5 Apr 2011 14:49:21 +0000 (10:49 -0400)]
StScrollBar: use clutter_actor_has_allocation()
StScrollBar was tracking whether or not it currently had a valid
allocation, but since Clutter 1.4 there is a method it can call to get
that information instead.
Colin Walters [Thu, 5 May 2011 22:09:59 +0000 (18:09 -0400)]
Change 'debugexit' to quit main loop rather than exit(), add cleanup
A new envrionment variable GNOME_SHELL_ENABLE_CLEANUP is added which
causes us to attempt freeing global data. The reason this isn't
enabled by default is that it's a waste of time at best, and at
worst in corner cases could cause crashes which would fill up
crash databases. Better to leave it as a developer-only tool.
Rui Matos [Thu, 5 May 2011 15:09:07 +0000 (16:09 +0100)]
panel: Don't propagate button-release-event in _onCornerClicked()
Since both the hot corner's ClutterGroup and the hot corner's
ClutterRectangle button-release-event is connected to
_onCornerClicked() we must handle it there by returning 'true' to
Clutter or else _onCornerClicked() is called twice which defeats the
HOT_CORNER_ACTIVATION_TIMEOUT logic.
projects / gnome-shell.git / log